Your Position: Home > Support > YX GOIP Help

1.SIP Setting:


1. Registration: need the SIP server provides account and password;
Peer-to-peer: need fixed gateway IP and SIP server IP address,then you can only put in SIP server ip and SIP server port;
Multiple port registration: each channel can be registered a SIP account, also can register the same SIP account;
2.The default is NONE,If you need encryption Please select encryption, you also need set proxy ip and proxy port.if you have linux server,you can contact YX support skype or business.we can help you to install this software.

3.Phone number : you can keep same with the account .
4.SIP account(you need add a account to softswitch ,and than put the account to here )
5.The corresponding certification account password
6.The IP address or domain name with the softswitch.
7.Server port ,Please set it according to your softswitch server(The default value is 5060)
8.After setting done , please press the Submit button

2.IMEI setting:

IMEI(International Mobile Equipment Identity).

1.Specify IMEI Prefix:


IMEI is a digital with 15 numbers, whose the last number is the check digit.When setting static IMEI for each port, you only need to input the front 14 digits and then click the "ok" button , the last digit will be automatically generated ,it is the creation process of whole IMEI .If you need each port has the same prefix,you can fill out the prefix, and then click the "copy", and finally it will generate the specified prefix.

2.Customize Range:


Dynamic IMEI

As the configuration of the above image, if you choose “Custom Range” to change IMEI, the GOIP equipment will acquiescently use the value of “IMEI Start”(Any 14 number ) as the IMEI initial value, and then the IMEI ’ last four numbers will dynamically be changed . Further more, when you change SIM card or restart the equipment ,the IMEI will also change.Click the "Add New" can add new dynamic IMEI list.


3.Automation setting:

*Consecutive No-Alert Calls Checking: This setting will check the call Alert status, when No-Alert continuously reaches a certain number, equipment according to your Settings will lock and switch to the next card;it can improve ASR.
*Reset When Switching:which reach to the setting values, the SIM card will be locked and change to the next SIM card , and reset the again.
*USSD Query:it will query USSD after change to the next card,.
*Locking Duration:0 means it will be not locked,-1 means it will be locked all the time,greater than 1 means the lock time(such as you choose 2, that means it will be locked 2 seconds).


Consecutive No-Answer Calls Checking:This setting will check the call answer status, when No-Answer continuously reaches a certain number, equipment according to your Settings will lock and switch to the next card;it can improve ASR.


*Consecutive Short-Duration Calls Checking:This setting will check the contact times status, when contact times is too Short continuously reaches a certain number, equipment according to your Settings will lock and switch to the next card;.it can improve ACD.
*Short Call Duration:This is to set the Short Call times(for example 10s).

If you need to update your goip,Please check out the latest version---YX Series GoIP Lastest Firmware Version